VpCI-369 is our best inhibitor for use as an oil additive and/or temporary coating. The protective film is self-healing and moisture-displacing, providing superior protection against aggressive environments. VpCI-369 is also excellent when used as an oil additive for mothballing, shipping, or storage of parts and equipment. In small percentages, VpCI-369 has a minimal effect on viscosities.

FEATURES
• Self-healing
• Excellent lubricity
• Extends tool life for metalworking operations
• Excellent outdoor protection
• Excellent oil additive
• Dilutable with oil
• Meets MIL-PRF-16173E (Grade 2)
• NSN 8030-00-244-1295
• NSN 8030-00-244-1297
• NSN 8030-00-244-1298
• NSN 8030-01-149-1731

TYPICAL APPLICATIONS
• Wire rope
• Electrical connections/wiring
• Sheltered coating
• Gear protectant/lubricant
• Long-term (5+ years) equipment lay-up
• Stamping oil additive
• Drawing oil additive
• Cylinders
• Working/moving parts

METALS PROTECTED
• Silver
• Cast Iron
• Stainless Steel
• Copper
• Magnesium
• Aluminum
• Carbon Steel

MINIMUM REQUIREMENTS FOR SURFACE PREPARATION
NACE           SSPC              ARS
      4                    7-63             As low as B-3

Methods for Monitoring:
Wet Film Thickness Gauge

TYPICAL PROPERTIES
Appearance                                       Light beige/tan viscous liquid
Film Type                                              Oily
Flash Point                                           248 °F (120 °C)
Shelf Life                                                24 months @ 75?F (24?C)
Non-volatile Content                 95-99%
Theoretical Spread Rate      753-1506 ft2/gal @ 1-2 mils(18.8-37.6 m²/l @ 25-50 microns)
Viscosity                                                10,000-45,000 cps
Weight per Gallon                        7.5-8.4 lb/gal(0.9-1.0 kg/l)
Salt Spray (ASTM B117)       500 hrs

Humidity (ASTM D1748)      4000 hrs

APPLICATION
Product Preparation:
Product should be mixed thoroughly and uniform prior to use.

Product Application:
Product can be applied by spray, brush, roll, or dip. Normal DFT is 1-3 mils (25-75 microns). Apply VpCI-369 in a well-ventilated area.

Product Cleanup:
For cleanup of tools and overspray, use alkaline cleaners such as Cortec VpCI-414 or mineral spirits

LIMITATIONS
VpCI-369 can be removed if applied in splash zones, heavy rains, or similar conditions. Parts protected with VpCI-369 should be sheltered for best results.

PACKAGING
VpCI-369 is available in 5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums, and VpCI-369 is also available in diluted forms.